Sale!

IE800 Extend Wide Band XWB Drivers (2pcs)

Original price was: $59.99.Current price is: $29.99.

  • Diameter – 7.8mm
  • Operating temperature -10 °C to +55 °C
  • Impedance- 16 Ohms
  • Frequency response 8 – 41000 Hz (-3 dB), 5 – 46500 Hz
  • Sound pressure level (SPL) 125 dB at 1V 1kHz

SKU: 7.8mm XWB IE800 Drivers Category: Tags: , , ,

Description

Features and specifications

This is a pair of 7.8mm XWB (Extra Wide Band) driver unit offering 5~45KHz frequency response, manufactured with the same diaphragm as IE800 and driving technology:

“Sennheiser’s original IE800 in-ear headphone was debuted five years ago, which was a super comfy, extremely open, natural sounding phone… It’s designed and hand-made in Germany…. The new IE800 S features a single 7mm driver mounted in each ceramic ear piece; impedance is rated at 16 ohms. It comes with a rather deluxe looking real leather travel case. I like … the injection-molded ceramic ear pieces looked snazzy in high gloss metallic grey, but the IE800 S’ ear pieces are finished in a more subdued satin grey. Sennheiser isn’t making any great claims about sonic differences between the two models, other than to say the IE800 S’ 7mm drivers are redesigned. The IE800 S retails for $1,000, £870 and AU$1,600, while the original IE800 is still listed on Sennheiser’s website at $800, £560 and AU$1,200.” Quote from CNET on the impression of IE800.

Package

  • 1 Pair (2 pieces) 7.8mm XWB Drivers
  • 2 pieces of front cover spacer (for air sealing in installation)

We recommend using them be used with our 8mm Sennheiser IE800 Ceramic Shell or wooden shells.

Measurement

Measurement is based on an IEC711 coupler, a customized USB sound card and Win10 PC running ARTA Software.

7.8mm inner ear XWB (Extra Wide Band) Sennheiser IE800 dynamic driver
The IE800 kit measured by IEC711 coupler.

Frequency Response measurement – note the measurement is done with sponge ear-tips, if using silicon rubber eartips, there will be a 5dB boost on 16Khz.

7.8mm inner ear XWB (Extra Wide Band) Sennheiser IE800 dynamic driver
Frequency response on ARTA

CSD (Cumulative Spectral Decay), i.e., the waterfall diagram. Notice the decay rate at 500hz-20Khz is very consistent, meaning less interference among bass, mid and treble.

7.8mm inner ear XWB (Extra Wide Band) Sennheiser IE800 dynamic driver

Cumulative Spectral Decay

Impulse response – notice the response duration is extremely short <1.2ms, meaning the response of this driver is very good.

7.8mm inner ear XWB (Extra Wide Band) Sennheiser IE800 dynamic driver
Impulse response

Burst Decay – notice the consistency among all the bands

7.8mm inner ear XWB (Extra Wide Band) Sennheiser IE800 dynamic driver

Burst decay

This diagram shows the polarity of the driver. The colored (in most cases RED) soldering panel is always positive side.

 

Proceed with caution: dynamic drivers are with extremely fragile (1~5μm) diaphragm and can be easily damaged in following situations.

  • Soldering: overheated (>250 degree C) soldering iron or overtime soldering (>2s) may permanently damage the driver. Please heat the driver as little as possible during soldering.
  • Installation: the driver has Sintered NdFeB Magnetic inside with extremely strong attraction power. The fragile diaphragm may be damaged by having anything metallic hit it. 
  • Gluing: attaching glue either to the diaphragm or the backside holes may greatly alter the sound
  • Chemical: Applying any chemical solvent will void your warrant and we will not be able to help you
  • Others: applying high-voltage, storing in high temperature/humid environment… all may cause unrecoverable damage.

Additional information

Weight 0.1 kg
Dimensions 15 × 10 × 3 cm

Reviews

There are no reviews yet.

Be the first to review “IE800 Extend Wide Band XWB Drivers (2pcs)”

Your email address will not be published. Required fields are marked *